Qwiic Connect System

SparkFun Qwiic Connect System is an ecosystem of I2C sensors, actuators, shields, and cables that make prototyping faster and less prone to error. The Qwiic Connect System uses the Inter-integrated Circuit (I2C) Protocol. I2C protocol is intended to allow multiple "slave" digital integrated circuits to communicate with one or more "master" chips with only two wires. 

Tous les résultats (34)

Sélectionner Image Référence
 Fab.
Description Fiche technique Disponibilité Prix (CAD) Filtrer les résultats dans le tableau par prix unitaire basé sur votre quantité.
Qté. RoHS

SparkFun Outils de développement d'afficheurs The SparkFun SerLCD is an AVR-based serial enabled LCD that provides a simple and cost effective solution for adding a 20x4 Black on RGB Liquid Crystal Display into your project. We've seriously overhauled the PCB design on the back of the screen by 182En stock
Min. : 1
Mult. : 1
SparkFun Outils de développement de capteurs de température It's time to say hip hip array for this IR Breakout! The MLX90640 SparkFun IR Array Breakout is equipped with a 32x24 array of thermopile sensors creating in essence a low resolution thermal imaging camera. With this breakout you can detect surface
Fiche technique
20En stock
Min. : 1
Mult. : 1
Non

SparkFun Outils de développement d'afficheurs The SparkFun SerLCD is an AVR-based serial enabled LCD that provides a simple and cost effective solution for adding a 16x2 RGB on Black Liquid Crystal Display into your project. We've seriously overhauled the PCB design on the back of the screen by
Fiche technique
63En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun Qwiic JST Connector- SMD 4-pin
Fiche technique
5,420En stock
MouseReel disponible
Min. : 1
Mult. : 1
: 1,000

SparkFun Accessoires SparkFun The SparkFun Qwiic Connect System is constantly growing in popularity with makers. So to make it even easier to get started we've assembled this Qwiic Cable Kit for everyone. If you aren't sure which Qwiic cable to use this handy box includes all o
Fiche technique
146En stock
1832026-09-28 attendu
Min. : 1
Mult. : 1
Non
SparkFun Accessoires SparkFun The SparkFun Qwiic MicroPressure Sensor is a miniature breakout equipped with Honeywell's 25psi piezoresistive silicon pressure sensor. This MicroPressure Sensor offers a calibrated and compensated pressure sensing range of 60mbar to 2.5bar easy to
Fiche technique
51En stock
Min. : 1
Mult. : 1
Non
SparkFun Outils de développement de capteurs magnétiques It's time to start utilizing the superior magnetometer and what better way than to throw it onto an easy-to-use breakout board? The SparkFun MLX90393 Magnetometer Breakout is a triple-axis magnetic sensor board capable of sensing very small fields
Fiche technique
52En stock
Min. : 1
Mult. : 1

SparkFun Outils de développement de capteurs de température Get ready to be able to see like the Predator! The SparkFun Grid-EYE Infrared Array Breakout board is an 8x8 thermopile array meaning you have a square array of 64 pixels capable of independent temperature detection. It s like having a thermal cam
Fiche technique
14En stock
Min. : 1
Mult. : 1

SparkFun Outils de développement de capteurs de température Looking to keep a log of the climate in your greenhouse create a humidor control system or want to track temperature and humidity data for a weather station project? The SparkFun SHTC3 Humidity Sensor may be the perfect option for you! The SHTC3 is
Fiche technique
35En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun Buttons are an easy and tactile way to interface with your project but why deal with debouncing polling and wiring up pull-up resistors? The SparkFun Qwiic Button Breakout simplifies all those worries away into an easy-to-use I2C device. Utilizing
Fiche technique
12En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun Buttons are an easy and tactile way to interface with your project but why would you want to deal with debouncing polling and wiring up pull-up resistors? The Qwiic Button with built-in red LED simplifies all of those nasty worries away into an ea
Fiche technique
75En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun Buttons are an easy and tactile way to interface with your project but why would you want to deal with debouncing polling and wiring up pull-up resistors? The Qwiic Button with built-in green LED simplifies all of those nasty worries away into an
Fiche technique
35En stock
Min. : 1
Mult. : 1

SparkFun Accessoires SparkFun SparkFun Qwiic Shield for Arduino 24En stock
Min. : 1
Mult. : 1

SparkFun Accessoires SparkFun The SparkFun Qwiic Adapter provides the perfect means to make any old I2C board into a Qwiic-enabled board. This adapter breaks out the I2C pins from the Qwiic connectors to pins that you can easily solder with your favorite I2C-enabled device.The Qw 424En stock
Min. : 1
Mult. : 1

SparkFun Accessoires SparkFun The SparkFun weather:bit is a fully loaded "carrier" board for the micro:bit that when combined with the micro:bit provides you with a fully functional weather station. With the weather:bit you will have access to barometric pressure relative humi
Fiche technique
2En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun The SparkFun Qwiic Shield for Arduino Nano provides you with a quick and easy way to enter into SparkFun's Qwiic ecosystem with your Arduino Nano board. The Qwiic shield connects the I2C bus (GND 3.3V SDA and SCL) on your Arduino Nano to four Spark
Fiche technique
14En stock
Min. : 1
Mult. : 1


SparkFun Outils de développement d'afficheurs The SparkFun SerLCD is an AVR-based serial enabled LCD that provides a simple and cost effective solution for adding a 16x2 Black on RGB Liquid Crystal Display into your project. We've seriously overhauled the PCB design on the back of the screen by
Fiche technique
32En stock
Min. : 1
Mult. : 1
SparkFun Outils de développement de circuits intégrés de conversion de données A lot of the time you just need to add more analog inputs to solve a problem. It happens. The SparkFun Qwiic 12 Bit ADC can provide four channels of I2C controlled ADC input to your Qwiic enabled project. These channels can be used as single-ended in 41En stock
Min. : 1
Mult. : 1
Non
SparkFun HAT/cartes complémentaires Raspberry Pi The SparkFun Qwiic SHIM for Raspberry Pi is a small easily removable breakout that easily adds a Qwiic connector to your Raspberry Pi. The SHIM design allows you to plug directly to the Pi's I2C bus with no soldering required and the thin PCB design
Fiche technique
180En stock
Min. : 1
Mult. : 1
Non
SparkFun Outils de développement de circuits intégrés pour la gestion de l'alimentation The SparkFun Qwiic Motor Driver takes all the great features of the Serial Controlled Motor Driver (SCMD) and miniaturizes them adding Qwiic ports for plug and play functionality. Boasting the same 4245 PSOC and 2-channel motor ports as the SCMD th
Fiche technique
5En stock
72026-11-24 attendu
Min. : 1
Mult. : 1
Non
SparkFun Outil de développement de capteur à distance This SparkFun Distance Sensor Breakout uses the VL53L1X next-generation Time-of-Flight (ToF) sensor module to deliver highly accurate measurements at long ranges for its size. Unlike standard IR sensors that rely on reflected light intensity the VL5
Fiche technique
16En stock
Min. : 1
Mult. : 1
Non
SparkFun Outils de développement de capteurs de température It's time to say hip hip array for this IR Breakout! The MLX90640 SparkFun IR Array Breakout is equipped with a 32x24 array of thermopile sensors creating in essence a low resolution thermal imaging camera. With this breakout you can detect surface
Fiche technique
3En stock
Min. : 1
Mult. : 1
Non
SparkFun Accessoires SparkFun The SparkFun Qwiic Shield for Thing Plus provides you with a quick and easy way to enter into SparkFun's Qwiic ecosystem with your Thing Plus or Feather boards. Since the Thing Plus and Feather footprints are interchangable you can use this shield w
Fiche technique
14En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun Keypads are very handy input devices but who wants to tie up seven GPIO pins wire up a handful of pull-up resistors and write firmware that wastes valuable processing time scanning the keys for inputs? The SparkFun Qwiic Keypad comes fully assembl 14En stock
Min. : 1
Mult. : 1
Non
SparkFun Outils de développement NFC/RFID The SparkFun RFID Qwiic Reader is a simple I2C-based RFID breakout board for the ID-3LA ID-12LA and ID-20LA readers. Plug a reader into the headers and use a Qwiic cable. Then scan your 125kHz ID tag and the unique 32-bit ID will be displayed on 2En stock
Min. : 1
Mult. : 1
Non