All Results (1,676)

SparkFun Accessories This is a simple LED-illuminated tactile button with a clear cap. It's just like a basic tactile button but it lights up blue! So now you can get visual feedback or light up your project. These have a 12mm body and are rated for 50mA. They don't ea

SparkFun Accessories This simple on-off switch is rated for 20A at 12V but who cares about all that it looks way awesome. These toggle switches come with those missile switch covers that make your project look like something out of a spy movie. They're also a great safe

SparkFun Accessories Amphenol FCI Clinchr Conn. (3 POS,F)

SparkFun Accessories Looking to add MIDI to your project? This is a female 5-pin right-angle DIN 5/180? connector which will interface with most standard MIDI cables. The pins are spaced by just about 0.1" making these connectors easy to prototype with. The contacts

SparkFun Accessories Standard Philips-head 4-40 screws. They are 1/2" long and come in packs of ten. This is the screw size we use in most of the holes for our breakout boards. Check below for other associated hardware.

SparkFun Accessories You'll have no need for a screwdriver with this terminal! This is a 4-pin Latch Terminal with 5mm pitch pins. Each pin is rated up to 250V @ 11A and will line up well with the standard 0.19" spacing. Please note that the pins are thick enough (1.20mm

SparkFun Accessories USB is being implemented as a power connection standard more and more these days but you don't always have a computer on hand so how are you going to power all of your sweet USB devices? How about a high quality switching 'wall wart'? This AC to DC

SparkFun Accessories Chip Quik No-Clean Flux Pen - 10mL

SparkFun Accessories Electrolytic decoupling capacitors 1000uF/25V. These capacitors are great transient/surge suppressors and work well in high-voltage and audio applications. High quality radial electrolytic capacitors.

SparkFun Accessories This 0.012" Muscle Wire (aka shape memory Nitinol) is a one foot long piece of nickel-titanium alloy that can flex and contract when a specific amount of heat or current is applied to it. If you are asking yourself "What sorcery is this?!" We assur

SparkFun Accessories This is a 3-terminal microswitch two pack each equipped with a 20mm offset lever actuator. These switches have a great 'clicky' sound to them with a nice tactile feel and are perfect when used for a slider 3D printer or robot project. Each microsw

SparkFun Accessories Here is a six pin vertical 1.0mm pitch connector. It is useful if you need something very tiny as a connection. These are not the standard JST type connectors we use on most of our boards but are actually the much smaller JST-SH type.