Back to Texas Instruments

Texas Instruments DRV8844 Quad 1/2-H-Bridge Driver IC

Texas Instruments DRV8844 Quad 1/2-H-Bridge Driver IC provides four individually controllable 1/2-H-bridge drivers and can be used to drive two DC motors, one stepper motor, four solenoids, or other loads. The output driver channel for each channel consists of N-channel power MOSFETs configured in a 1/2-H-bridge configuration.

DRV8844 can supply up to 2.5A peak or 1.75A RMS output current per channel (with proper PCB heatsinking at 24V and 25°C) per H-bridge. TI DRV8844 is ideal for use in a variety of applications, including textile machines, office automation machines, gaming machines, factory automation, and robotics. DRV8844EVM is an evaluation module for DRV8844 that includes an MSP430 microcontroller and a USB interface chip.

Features

  • Quad 1/2-H-bridge DC motor driver can drive four solenoids, two DC motors, one stepper motor, or other loads
  • Full individual half bridge control
  • Low MOSFET On-resistance
  • 2.5A maximum drive current at 24V, +25°C
  • Floating input buffers allow dual (bipolar) supplies (up to ±30V)

Applications

  • Textile machines
  • Office automation machines
  • Gaming machines
  • Factory automation
  • Robotics

Evaluation Module

Texas Instruments DRV8844EVM Evaluation Module

Demonstrates the capabilities and performance of the DRV8844 motor driver.

Learn Moreabout Texas Instruments DRV8844EVM Evaluation Module View Productsrelated to Texas Instruments DRV8844EVM Evaluation Module

Block Diagram

Block Diagram - Texas Instruments DRV8844 Quad 1/2-H-Bridge Driver IC
Published: 2013-05-15 | Updated: 2023-04-03