Électromécanique

Résultats: 53
Sélectionner Image Référence
 Fab.
Description Fiche technique Disponibilité Prix (CAD) Filtrer les résultats dans le tableau par prix unitaire basé sur votre quantité.
Qté. RoHS
SparkFun Moteurs à vibrations A vibration motor! This itty-bitty shaftless vibratory motor is perfect for non-audible indicators. Use in any number of applications to indicate to the wearer when a status has changed. All moving parts are protected within the housing. With a 2-3.
Fiche technique
113En stock
Min. : 1
Mult. : 1

SparkFun Pavés numériques Keypad - 12 Button
Fiche technique
484En stock
Min. : 1
Mult. : 1
Non
SparkFun Interrupteurs à tiges/magnétiques This is a small device called a reed switch. When the device is exposed to a magnetic field the two ferrous materials inside the switch pull together and the switch closes. When the magnetic field is removed the reeds separate and the switch opens. 8En stock
Min. : 1
Mult. : 1
SparkFun Moteurs CC These are a pair of right angle hobby gearmotors from DAGU. These gearmotors are the same ones utilized in the Magician Chassis and RedBot Kit and offer a cheap and easy to use setup to get your wheels turning. Due to these gear motors being at a ri
Fiche technique
10En stock
Min. : 1
Mult. : 1
SparkFun Relais universels DC Power Relays interrupt high-capacity DC loads and high-voltage DC circuits in a compact low-noise design. The switching section and driving section are gas-injected and hermetically sealed allowing these compact relays to interrupt high-capacity
Fiche technique
4En stock
Min. : 1
Mult. : 1
Non
SparkFun Écarteurs et entretoises One of the things we always seem to need is standoffs. This 210-piece brass standoff kit ensures you'll always have a set handy. Covering two of the most popular screw sizes used with PCBs and different standoff heights it's a perfect addition to yo 69En stock
122026-09-25 attendu
Min. : 1
Mult. : 1


SparkFun Solénoïdes et actionneurs Solenoid, 5V, 2-pin JST PH Connector
Fiche technique
419En stock
Min. : 1
Mult. : 1
SparkFun Moteurs pas-à-pas Stepper Motor w/ Cable
Fiche technique
50En stock
Min. : 1
Mult. : 1
Non
SparkFun Haut-parleurs et transducteurs If you want to get some sound out of your project but have a tight space budget this is a good way to do it. This 2.5W 4 Ohm speaker is only 28mm in diameter and just over 4mm thick. The cable is roughly 180mm long and terminates in a 2-wire JST co 45En stock
Min. : 1
Mult. : 1
SparkFun Interrupteurs à tiges/magnétiques LilyPad Reed Switch
Fiche technique
2En stock
Min. : 1
Mult. : 1

SparkFun Moteurs pas-à-pas When you need exact positioning and repeatability rather than just raw speed a DC motor won't cut it; you need a stepper. This Small Stepper Motor is the perfect solution for small-scale robotics gauges dials and camera mechanisms.Unlike standard
Fiche technique
20En stock
Min. : 1
Mult. : 1
SparkFun Moteurs CC These micro gearmotors are incredibly tough and feature full metal gears. They have a gear ratio of 50:1 and operate up to 12 volts and have a stall torque of 20 oz-in. and a max speed of 460 RPM. Each micro gearmotor sports a 3mm D-shaft.Note: The m 1En stock
Min. : 1
Mult. : 1
SparkFun Moteurs CC Micro Gearmotor 90 RPM (6-12V) 46En stock
Min. : 1
Mult. : 1

SparkFun Moteurs CC These are a pair of hobby gearmotors from DAGU. These gearmotors are the same ones recommended for use in the Shadow Chassis and offer a cheap and easy-to-use setup to get your wheels turning. Each Hobby Gearmotor also possess a 9mm long output on a
Fiche technique
30En stock
Min. : 1
Mult. : 1
SparkFun Moteurs CC This gearmotor consists of a low-power 12 V brushed DC motor combined with a 9.68:1 metal spur gearbox and it has an integrated 48 CPR quadrature encoder on the motor shaft which provides 464.64 counts per revolution of the gearbox s output shaf 1En stock
Min. : 1
Mult. : 1


SparkFun Solénoïdes et actionneurs 12V Solenoid Valve 3/4in
Fiche technique
13En stock
Min. : 1
Mult. : 1
Non
SparkFun Moteurs pas-à-pas Stepper Motor 400 steps/rev
Fiche technique
13En stock
Min. : 1
Mult. : 1
SparkFun Moteurs CC This is a simple 140RPM (no load) DC planetary gearmotor. This motor is great for various applications such as robotics electric locks household automation and small actuators.The supply voltage range is 6VDC - 24VDC with the polarity marker at
Fiche technique
70En stock
Min. : 1
Mult. : 1
Non
SparkFun Solénoïdes et actionneurs Solenoids are a great way to induce linear motion for pushing pulling or controlling switches and levers. According to the datasheet this solenoid is rated for 36V but they work like a charm at 12V. We've been controlling them with the Arduino Power
Fiche technique
Délai de livraison 8 Semaines
Min. : 1
Mult. : 1

SparkFun Interrupteurs à tiges/magnétiques This is a small device called a reed switch. When the device is exposed to a magnetic field the two ferrous materials inside the switch pull together and the switch closes. When the magnetic field is removed the reeds separate and the switch opens. Non stocké
Min. : 1
Mult. : 1

SparkFun Haut-parleurs et transducteurs Surface transducers give you the awesome power to turn almost any surface into a speaker. They're essentially just a speaker except instead of a cone the coil is attached to a pad that conducts the vibration into whatever you press it against. Hook Non stocké
Min. : 1
Mult. : 1

SparkFun Haut-parleurs et transducteurs Speaker - PCB Mount Non stocké
Min. : 1
Mult. : 1

SparkFun Commutateurs DIL/Commutateurs SIL DIP Switch - 8 Position (SMD) Non stocké
Min. : 1
Mult. : 1

SparkFun Écarteurs et entretoises These aluminum hex standoffs are 2.375in. (60.33mm) long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure or just getting it up off the table. Sold individually. Non stocké
Min. : 1
Mult. : 1
SparkFun Écarteurs et entretoises Hex Standoff - Aluminum Threaded (M2.5; 16mm; 4.5mm AF) Non stocké
Min. : 1
Mult. : 1