Tous les résultats (1,945)

Filtres

Options de disponibilité
Sélectionner Image Référence
 Fab.
Description Fiche technique Disponibilité Prix (CAD) Filtrer les résultats dans le tableau par prix unitaire basé sur votre quantité.
Qté. RoHS
SparkFun Ordinateurs à carte unique The micro:bit v2 Go Bundle is the quickest and most economical way to get started with the micro:bit ecosystem. While the standalone board is great for those who already have a workshop full of cables this bundle is designed for those who want to hi 20En stock
Min. : 1
Mult. : 1
SparkFun Embases et logements de câbles This is a super small 2x5 pin female PTH header. This header is in the common configuration for JTAG applications. Each pin has a spacing of 1.27mm in between each other.
Fiche technique
76En stock
Min. : 1
Mult. : 1

SparkFun Moteurs à vibrations A vibration motor! This itty-bitty shaftless vibratory motor is perfect for non-audible indicators. Use in any number of applications to indicate to the wearer when a status has changed. All moving parts are protected within the housing. With a 2-3.
Fiche technique
103En stock
Min. : 1
Mult. : 1

SparkFun Modules Zigbee - 802.15.4 After years of popularity with the XBee Series 1 and XBee Series 2 Pro Modules we now have the XBee Series 3 Pro which brings the best of both worlds. XBee 3 not only handles 802.15.4 and ZigBee but also BLE protocols and you can now talk to the m
Fiche technique
5En stock
Min. : 1
Mult. : 1

SparkFun Modules multiprotocoles The Edimax 2-in-1 Wi-Fi 4 N150 & Bluetooth 4.2 Nano USB Adapter is a nano-sized USB Wi-Fi adapter with Bluetooth 4.2 that supports Wi-Fi up to 150Mbps while allowing users to connect to all the latest Bluetooth devices such as mobile phones ta
Fiche technique
7En stock
Min. : 1
Mult. : 1

SparkFun Outils de développement d'interface The SparkFun ESLOV to Qwiic Bridge lets you quickly and easily connect Qwiic breakouts to Arduino boards with an ESLOV connector for I2C communication. ESLOV and Qwiic allow for simple assembly of I2C circuits without requiring soldering. The ESLOV t 16En stock
Min. : 1
Mult. : 1
SparkFun Clips de test IC Test Clip SOIC 8-Pin 6En stock
Min. : 1
Mult. : 1

SparkFun Photodiodes The BPW34 is a tiny general purpose PiN photodiode. This photodiode has a ton of uses one of which is to use it is a mini solar cell to power your project. The cell is sensitive to a wide range of light wavelengths (430-1100nm) so it should produc 34En stock
Min. : 1
Mult. : 1
SparkFun Connecteurs USB The Raspberry Pi Micro USB to USB-C Adapter is a small adapter that allows a male Micro-B USB power adapter the ability to power devices with a female USB Type C port specifically the Raspberry Pi 4. This adapter is perfect for those looking to powe 18En stock
Min. : 1
Mult. : 1
SparkFun Kits robotiques éducatifs This pan/tilt bracket consists of two brackets and all the hardware you need to attach them to make a pan/tilt mechanism using two servo motors. We recommend our small servo motors listed below.Note: Servos are not included. The sub-micro servo size 2En stock
Min. : 1
Mult. : 1
SparkFun Modules vidéos This is the Logitech C270 Webcam. With a sleek compact look and a black finish this is not just for looks. This economical choice provides a 720p/30FPS HD resolution in a 16:9 widescreen format. The Logitech C270 webcam is compatible with most major 5En stock
Min. : 1
Mult. : 1
SparkFun Ventilateurs CC The Raspberry Pi 4 Case Fan works with Raspberry Pi 4 and the Raspberry Pi 4 Case. Designed for overclockers and other power users it keeps your Raspberry Pi 4 at a comfortable operating temperature even under heavy load. The temperature-controlled 6En stock
Min. : 1
Mult. : 1
SparkFun Accessoires d'antennes This aluminum adapter converts the very common 1/4" thread found on camera tri-pods and mono-pods to the 5/8" 11-TPI (threads per inch) found on high-end surveying antennas and equipment. It's ideal for mounting RTK surveying antennas onto a monopod 91En stock
Min. : 1
Mult. : 1
SparkFun Kits robotiques éducatifs This is the Wheel Encoder Kit from DAGU a simple add-on to any wheeled robot that can help measure the speed or distance the chassis travels. Each wheel encoder kit consists of two neodymium 8-pole magnets with rubber hubs and two hall-effect sensor
Fiche technique
28En stock
Min. : 1
Mult. : 1
SparkFun Capteurs de position et de mouvement enfichables This basic piezo sensor from Measurement Specialties is often used for flex touch vibration and shock measurements. A small AC and large voltage (up to +/-90V) is created when the film moves back and forth. A simple resistor should get the voltage 5En stock
Min. : 1
Mult. : 1

SparkFun Capteurs de qualité de l'air Carbon Monoxide Sensor MQ-7
Fiche technique
21En stock
Min. : 1
Mult. : 1

SparkFun Capteurs de qualité de l'air The MQ-9B is a CO and CH gas-detection sensor from Winsen. The sensing material of the MQ-9B is SnO2 which has a low conductivity in clean air. It detects carbon monoxide (1.5V) by cycling between high and low temperatures. The sensor s conduct 14En stock
Min. : 1
Mult. : 1
SparkFun Tournevis, clés à écrous et clés à douilles There's nothing worse than getting ready for a good hack and then realizing that you can't even get the box open because you don't have the right screwdriver. Sure we all have a few Phillips-head drivers and maybe a few slotted drivers but what abou 11En stock
11Sur commande
Min. : 1
Mult. : 1
SparkFun Minuteurs et produits de support This is a common 555 timer/oscillator from TI. A classic for all of those first year circuits projects where you need to blink an LED generate tone and thousands of other great beginning projects. Google around for a huge list of resources and exam 332En stock
Min. : 1
Mult. : 1
SparkFun Outils de développement de capteurs de pression Flexiforce Pressure Sensor - 100lbs. 24En stock
Min. : 1
Mult. : 1

SparkFun Outils de développement Bluetooth - 802.15.1 If you are looking for a board that can truly handle your next Internet of Things project look no further. The SparkFun Artemis Thing Plus combines the powerful Artemis module with our popular Thing Plus footprint. It packs 1MB flash 384k RAM an 19En stock
Min. : 1
Mult. : 1
SparkFun Modules multiprotocoles The ESP32-WROOM-32E is a powerful generic Wi-Fi+BT+BLE MCU module that targets a wide variety of applications ranging from low-power sensor networks to the most demanding tasks such as voice encoding music streaming and MP3 decoding. At the core
Fiche technique
4En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun Have you ever needed to power a project while in your car? Now you can without having to drag a computer along with this cost effective 5V 2.4A USB car charger. These car chargers have a standard USB 'A' connector for the output so you can power you 1,028En stock
Min. : 1
Mult. : 1

SparkFun Accessoires du programmeur This is a handy AVR programming cable that incorporates both the 10-pin and 6-pin ISP programming interfaces.Cable is about 12" long and mates with pins on 1/10in centers. 69En stock
Min. : 1
Mult. : 1

SparkFun Diodes de commutation de signal faible This is a very common signal diode - 1N4148. Use this for signals up to 200mA of current. 107En stock
Min. : 1
Mult. : 1