SparkFun Electronics Électromécanique

Résultats: 53
Sélectionner Image Référence
 Fab.
Description Fiche technique Disponibilité Prix (CAD) Filtrer les résultats dans le tableau par prix unitaire basé sur votre quantité.
Qté. RoHS
SparkFun Moteurs à vibrations A vibration motor! This itty-bitty shaftless vibratory motor is perfect for non-audible indicators. Use in any number of applications to indicate to the wearer when a status has changed. The housing protects all moving parts. With a 2-3.6V operating
Fiche technique
84En stock
$4.25
Min. : 1
Mult. : 1
SparkFun Pavés numériques Keypad - 12 Button
Fiche technique
478En stock
$7.13
Min. : 1
Mult. : 1
Non
SparkFun Moteurs CC These are a pair of right angle hobby gearmotors from DAGU. These gearmotors are the same ones utilized in the Magician Chassis and RedBot Kit and offer a cheap and easy to use setup to get your wheels turning. Due to these gear motors being at a ri
Fiche technique
10En stock
$11.07
Min. : 1
Mult. : 1
SparkFun Interrupteurs à tiges/magnétiques This small insulated reed switch can carry up to 0.8A and 0.35A to 0.5A while switched making it ideal for projects that require non-contact control. Reed switches are magnetically actuated electrical switches (not magically actuated though it seem 8En stock
$5.04
Min. : 1
Mult. : 1
SparkFun Écarteurs et entretoises One of the things we always seem to need is standoffs. This 210-piece brass standoff kit ensures you'll always have a set handy. Covering two of the most popular screw sizes used with PCBs and different standoff heights it's a perfect addition to yo 70En stock
$28.11
Min. : 1
Mult. : 1


SparkFun Solénoïdes et actionneurs Solenoid, 5V, 2-pin JST PH Connector
Fiche technique
462En stock
$9.36
Min. : 1
Mult. : 1
SparkFun Moteurs pas-à-pas Stepper Motor w/ Cable
Fiche technique
77En stock
$43.95
Min. : 1
Mult. : 1
Non
SparkFun Haut-parleurs et transducteurs If you want to get some sound out of your project but have a tight space budget this is a good way to do it. This 2.5W 4 Ohm speaker is only 28mm in diameter and just over 4mm thick. The cable is roughly 180mm long and terminates in a 2-wire JST co 24En stock
$3.24
Min. : 1
Mult. : 1
SparkFun Interrupteurs à tiges/magnétiques LilyPad Reed Switch
Fiche technique
2En stock
$9.92
Min. : 1
Mult. : 1
SparkFun Solénoïdes et actionneurs Solenoids are a great way to induce linear motion for pushing pulling or controlling switches and levers. According to the datasheet this solenoid is rated for 36V but they work like a charm at 12V. We've been controlling them with the Arduino Power
Fiche technique
20En stock
$53.48
Min. : 1
Mult. : 1
SparkFun Moteurs pas-à-pas When you need exact positioning and repeatability rather than just raw speed a DC motor won't cut it; you need a stepper. This Small Stepper Motor is the perfect solution for small-scale robotics gauges dials and camera mechanisms.Unlike standard
Fiche technique
19En stock
$22.25
Min. : 1
Mult. : 1
SparkFun Moteurs CC Micro Gearmotor 90 RPM (6-12V) 36En stock
$35.54
Min. : 1
Mult. : 1
SparkFun Moteurs CC This gearmotor consists of a low-power 12 V brushed DC motor combined with a 9.68:1 metal spur gearbox and it has an integrated 48 CPR quadrature encoder on the motor shaft which provides 464.64 counts per revolution of the gearbox s output shaf 1En stock
$172.73
Min. : 1
Mult. : 1


SparkFun Solénoïdes et actionneurs 12V Solenoid Valve 3/4in
Fiche technique
11En stock
$13.87
Min. : 1
Mult. : 1
Non
SparkFun Moteurs pas-à-pas Stepper Motor 400 steps/rev
Fiche technique
13En stock
$45.58
Min. : 1
Mult. : 1
SparkFun Moteurs CC This is a simple 140RPM (no load) DC planetary gearmotor. This motor is great for various applications such as robotics electric locks household automation and small actuators.The supply voltage range is 6VDC - 24VDC with the polarity marker at
Fiche technique
55En stock
$10.27
Min. : 1
Mult. : 1
Non
SparkFun Moteurs CC These are a pair of hobby gearmotors from DAGU. These gearmotors are the same ones recommended for use in the Shadow Chassis and offer a cheap and easy-to-use setup to get your wheels turning. Each Hobby Gearmotor also possess a 9mm long output on a
Fiche technique
11Sur commande
$10.90
Min. : 1
Mult. : 1
SparkFun Moteurs CC These micro gearmotors are incredibly tough and feature full metal gears. They have a gear ratio of 50:1 and operate up to 12 volts and have a stall torque of 20 oz-in. and a max speed of 460 RPM. Each micro gearmotor sports a 3mm D-shaft.Note: The m Délai de livraison produit non stocké 2 Semaines
$35.54
Min. : 1
Mult. : 1
SparkFun Interrupteurs à tiges/magnétiques This small insulated reed switch can carry up to 1.2A and 0.5A while switched making it ideal for projects that require non-contact control. Reed switches are magnetically actuated electrical switches (not magically actuated though it seems that wa Non stocké
$3.24
Min. : 1
Mult. : 1
SparkFun Haut-parleurs et transducteurs Surface transducers give you the awesome power to turn almost any surface into a speaker. They're essentially just a speaker except instead of a cone the coil is attached to a pad that conducts the vibration into whatever you press it against. Hook Non stocké
$55.51
Min. : 1
Mult. : 1
SparkFun Haut-parleurs et transducteurs This through-hole speaker is great for projects where you need something that sounds better than a piezo buzzer but don't have room for a full-blown speaker. This 30mm diameter speaker is encased in plastic and will handle about 1W of power. Non stocké
$3.02
Min. : 1
Mult. : 1
SparkFun Commutateurs DIL/Commutateurs SIL A SMD DIP switch with 8 individual switch positions. Works great as general control switches. Non stocké
$2.52
Min. : 1
Mult. : 1
SparkFun Écarteurs et entretoises These aluminum hex standoffs are 2.375in. (60.33mm) long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure or just getting it up off the table. Sold individually. Non stocké
$2.81
Min. : 1
Mult. : 1
SparkFun Écarteurs et entretoises These aluminum hex standoffs are 4.5mm across the flats. 16.0mm long and tapped through for a M2.5-0.45 screw. These are great for mounting pHATs to Raspberry Pi boards.Sold individually. Non stocké
$1.08
Min. : 1
Mult. : 1
SparkFun Moteurs pas-à-pas Most stepper motors spin requiring you to build complex belt or gear systems to move things back and forth. This motor simplifies everything by integrating a 100mm threaded shaft directly into the rotor. This turns the motor into a precise linear ac
Fiche technique
Non stocké
$80.57
Min. : 1
Mult. : 1