|
|
Other Tools QT grommet based compact split cable gland for tool-free snap-in mounting.
- 61435
- icotek
-
1:
$14.36
-
Non-Stocked Lead-Time 6 Weeks
|
Mouser Part #
31-61435
|
icotek
|
Other Tools QT grommet based compact split cable gland for tool-free snap-in mounting.
|
|
Non-Stocked Lead-Time 6 Weeks
|
|
|
$14.36
|
|
|
$13.88
|
|
|
$13.36
|
|
|
$12.76
|
|
|
View
|
|
|
$12.60
|
|
|
$12.59
|
|
Min.: 1
Mult.: 1
|
|
Click Tool
|
Mounting Tool
|
|
|
|
|
Other Tools Hydraulic punch driver for cut-outs on V2A stainless steel, sheet steel, aluminium or plastics. Suitable for round and rectangular punches. Also available with knockout die sets metric M16 - M63.
- 80002
- icotek
-
1:
$5,372.64
-
Non-Stocked Lead-Time 6 Weeks
|
Mouser Part #
31-80002
|
icotek
|
Other Tools Hydraulic punch driver for cut-outs on V2A stainless steel, sheet steel, aluminium or plastics. Suitable for round and rectangular punches. Also available with knockout die sets metric M16 - M63.
|
|
Non-Stocked Lead-Time 6 Weeks
|
|
Min.: 1
Mult.: 1
|
|
Foot Pump
|
Hydraulic
|
|
|
|
|
Other Tools The DIN-RC cutter cuts various top hat DIN rails & bus bars with little effort and accurately. The cut is clean and free of burrs; there is no waste.
- 80189
- icotek
-
1:
$2,432.61
-
Non-Stocked Lead-Time 6 Weeks
|
Mouser Part #
31-80189
|
icotek
|
Other Tools The DIN-RC cutter cuts various top hat DIN rails & bus bars with little effort and accurately. The cut is clean and free of burrs; there is no waste.
|
|
Non-Stocked Lead-Time 6 Weeks
|
|
Min.: 1
Mult.: 1
|
|
Rail Cutter
|
|
DIN Rail
|
|
|
|
Other Tools The DIN-RC cutter cuts various top hat DIN rails & bus bars with little effort and accurately. The cut is clean and free of burrs; there is no waste.
- 80190
- icotek
-
1:
$3,151.61
-
Non-Stocked Lead-Time 6 Weeks
|
Mouser Part #
31-80190
|
icotek
|
Other Tools The DIN-RC cutter cuts various top hat DIN rails & bus bars with little effort and accurately. The cut is clean and free of burrs; there is no waste.
|
|
Non-Stocked Lead-Time 6 Weeks
|
|
Min.: 1
Mult.: 1
|
|
Rail Cutter
|
|
DIN Rail
|
|
|
|
Other Tools Pressure compensation element with metric thread to avoid water condensation in highly sealed enclosures (IP68)
- 99190
- icotek
-
1:
$11.17
-
Non-Stocked Lead-Time 6 Weeks
|
Mouser Part #
31-99190
|
icotek
|
Other Tools Pressure compensation element with metric thread to avoid water condensation in highly sealed enclosures (IP68)
|
|
Non-Stocked Lead-Time 6 Weeks
|
|
|
$11.17
|
|
|
$11.12
|
|
|
$9.43
|
|
|
$9.12
|
|
|
View
|
|
|
$8.91
|
|
|
$8.73
|
|
|
$8.54
|
|
Min.: 1
Mult.: 1
|
|
Pressure Compensation Element
|
|
|
|
|
|
Other Tools By using a drainage device, it is possible to safely drain off the condensate without losing a maximum enclosure protection of IP66.
- 99193
- icotek
-
1:
$39.23
-
Non-Stocked Lead-Time 6 Weeks
|
Mouser Part #
31-99193
|
icotek
|
Other Tools By using a drainage device, it is possible to safely drain off the condensate without losing a maximum enclosure protection of IP66.
|
|
Non-Stocked Lead-Time 6 Weeks
|
|
|
$39.23
|
|
|
$37.80
|
|
|
$35.80
|
|
|
$34.59
|
|
|
View
|
|
|
$34.57
|
|
|
$34.56
|
|
Min.: 1
Mult.: 1
|
|
Drainage Device
|
|
M50 Hole
|
|
|
|
Other Tools Cable diameter measuring tool 3-17 mm
icotek 39800
- 39800
- icotek
-
1:
$33.61
-
Non-Stocked Lead-Time 6 Weeks
|
Mouser Part #
31-39800
|
icotek
|
Other Tools Cable diameter measuring tool 3-17 mm
|
|
Non-Stocked Lead-Time 6 Weeks
|
|
|
$33.61
|
|
|
$32.98
|
|
|
$32.54
|
|
|
$32.53
|
|
|
$32.13
|
|
Min.: 1
Mult.: 1
|
|
Cable Template
|
|
Measuring and Mounting of Cable
|
|
Canada