|
|
SparkFun Accessories The RedBoard Artemis takes the incredibly powerful Artemis module and wraps it into the familiar easy-to-use Uno footprint. Think of it as just another Arduino but one that features BLE 5.0 runs at 48MHz (with a 96MHz turbo mode) and boasts 1MB
- DEV-15444
- SparkFun
-
1:
$35.93
-
5In Stock
|
Mouser Part #
474-DEV-15444
|
SparkFun
|
SparkFun Accessories The RedBoard Artemis takes the incredibly powerful Artemis module and wraps it into the familiar easy-to-use Uno footprint. Think of it as just another Arduino but one that features BLE 5.0 runs at 48MHz (with a 96MHz turbo mode) and boasts 1MB
|
|
5In Stock
|
|
Min.: 1
Mult.: 1
|
No
|
|
|
|
SparkFun Accessories This is a simple six wire cable. Great for jumping from board to board or just about anything else. These cables mate with the connectors listed below. They have bare wires on one end and a 6-pin JST SH connector on the other end with a mating socket
- PRT-10361
- SparkFun
-
1:
$3.24
-
263In Stock
|
Mouser Part #
474-PRT-10361
|
SparkFun
|
SparkFun Accessories This is a simple six wire cable. Great for jumping from board to board or just about anything else. These cables mate with the connectors listed below. They have bare wires on one end and a 6-pin JST SH connector on the other end with a mating socket
|
|
263In Stock
|
|
Min.: 1
Mult.: 1
|
No
|
|
|
|
Audio IC Development Tools The SparkFun I2S Audio Breakout board uses the MAX98357A digital to analog converter (DAC) which converts I2S (not be confused with I2C) audio to an analog signal to drive speakers. The I2S Audio Breakout converts the digital audio signals using the
- DEV-14809
- SparkFun
-
1:
$10.80
-
36In Stock
|
Mouser Part #
474-DEV-14809
|
SparkFun
|
Audio IC Development Tools The SparkFun I2S Audio Breakout board uses the MAX98357A digital to analog converter (DAC) which converts I2S (not be confused with I2C) audio to an analog signal to drive speakers. The I2S Audio Breakout converts the digital audio signals using the
|
|
36In Stock
|
|
Min.: 1
Mult.: 1
|
No
|
|
|
|
LED Lighting Development Tools The SparkFun ESP32 Thing Plus DMX to LED Shield is the perfect way to send and receive DMX data. Whether it's coming in via the onboard XLR-3 jack or ArtNet or outputting over the XLR-3 Jack/ArtNet this shield has you covered! It's the perfect way
- DEV-15110
- SparkFun
-
1:
$29.71
-
6In Stock
|
Mouser Part #
474-DEV-15110
|
SparkFun
|
LED Lighting Development Tools The SparkFun ESP32 Thing Plus DMX to LED Shield is the perfect way to send and receive DMX data. Whether it's coming in via the onboard XLR-3 jack or ArtNet or outputting over the XLR-3 Jack/ArtNet this shield has you covered! It's the perfect way
|
|
6In Stock
|
|
Min.: 1
Mult.: 1
|
No
|
|
|
|
Development Boards & Kits - ARM Is it power you seek? With a 32-bit ARM Cortex-M4F MCU the SparkFun SAMD51 Thing Plus is one of our most powerful microcontroller boards yet! The SAMD51 Thing Plus provides you with an economical and easy to use development platform if you're needin
- DEV-14713
- SparkFun
-
1:
$36.72
-
1In Stock
|
Mouser Part #
474-DEV-14713
|
SparkFun
|
Development Boards & Kits - ARM Is it power you seek? With a 32-bit ARM Cortex-M4F MCU the SparkFun SAMD51 Thing Plus is one of our most powerful microcontroller boards yet! The SAMD51 Thing Plus provides you with an economical and easy to use development platform if you're needin
|
|
1In Stock
|
|
Min.: 1
Mult.: 1
|
No
|
|
|
|
Multiple Function Sensor Development Tools The SparkFun Lightning Detector adds lightning detection to your next weather station to make sure you are aware of any potential hazardous weather heading your way. The AS3935 is capable of detecting lightning up to 40km away with an accuracy of 1km
- SEN-15441
- SparkFun
-
1:
$50.33
-
13In Stock
|
Mouser Part #
474-SEN-15441
|
SparkFun
|
Multiple Function Sensor Development Tools The SparkFun Lightning Detector adds lightning detection to your next weather station to make sure you are aware of any potential hazardous weather heading your way. The AS3935 is capable of detecting lightning up to 40km away with an accuracy of 1km
|
|
13In Stock
|
|
Min.: 1
Mult.: 1
|
No
|
|
|
|
Power Management IC Development Tools The SparkFun Qwiic Motor Driver takes all the great features of the Serial Controlled Motor Driver (SCMD) and miniaturizes them adding Qwiic ports for plug and play functionality. Boasting the same 4245 PSOC and 2-channel motor ports as the SCMD th
- ROB-15451
- SparkFun
-
1:
$34.24
-
5In Stock
-
7On Order
|
Mouser Part #
474-ROB-15451
|
SparkFun
|
Power Management IC Development Tools The SparkFun Qwiic Motor Driver takes all the great features of the Serial Controlled Motor Driver (SCMD) and miniaturizes them adding Qwiic ports for plug and play functionality. Boasting the same 4245 PSOC and 2-channel motor ports as the SCMD th
|
|
5In Stock
7On Order
|
|
Min.: 1
Mult.: 1
|
No
|
|
|
|
Interface Development Tools RTC Module
- BOB-12708
- SparkFun
-
1:
$18.23
-
29In Stock
|
Mouser Part #
474-BOB-12708
|
SparkFun
|
Interface Development Tools RTC Module
|
|
29In Stock
|
|
Min.: 1
Mult.: 1
|
No
|
|
|
|
Pressure Sensor Development Tools Alt/Press SNSR B/O - MPL3115A2
- SEN-11084
- SparkFun
-
1:
$24.12
-
25In Stock
|
Mouser Part #
474-SEN-11084
|
SparkFun
|
Pressure Sensor Development Tools Alt/Press SNSR B/O - MPL3115A2
|
|
25In Stock
|
|
Min.: 1
Mult.: 1
|
No
|
|
|
|
SparkFun Accessories This is the two inch version of the SparkFun LuMini LED Ring packed with 40 individually addressable LEDs each capable of producing 16 million colors it provides you with a lot of color for just about any reason! LuMini is a miniaturized version o
- COM-14966
- SparkFun
-
1:
$28.04
-
2In Stock
|
Mouser Part #
474-COM-14966
|
SparkFun
|
SparkFun Accessories This is the two inch version of the SparkFun LuMini LED Ring packed with 40 individually addressable LEDs each capable of producing 16 million colors it provides you with a lot of color for just about any reason! LuMini is a miniaturized version o
|
|
2In Stock
|
|
Min.: 1
Mult.: 1
|
No
|
|
|
|
SparkFun Accessories Here is a simple low-cost high quality servo for all your mechatronic needs. This servo is able to take in 6 volts and deliver 44.4 oz-in. of maximum torque at 0.18 sec/60 This is a small servo with a standard 3 pin power and control cable (red =
- ROB-14760
- SparkFun
-
1:
$31.97
-
1In Stock
|
Mouser Part #
474-ROB-14760
|
SparkFun
|
SparkFun Accessories Here is a simple low-cost high quality servo for all your mechatronic needs. This servo is able to take in 6 volts and deliver 44.4 oz-in. of maximum torque at 0.18 sec/60 This is a small servo with a standard 3 pin power and control cable (red =
|
|
1In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Educational Robotic Kits Pan/Tilt Bracket Kit (Single Attachment)
- ROB-14391
- SparkFun
-
1:
$16.56
-
6In Stock
|
Mouser Part #
474-ROB-14391
|
SparkFun
|
Educational Robotic Kits Pan/Tilt Bracket Kit (Single Attachment)
|
|
6In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories Resistor Lead Bending Tool
- TOL-13114
- SparkFun
-
1:
$13.29
-
87In Stock
|
Mouser Part #
474-TOL-13114
|
SparkFun
|
SparkFun Accessories Resistor Lead Bending Tool
|
|
87In Stock
|
|
Min.: 1
Mult.: 1
|
No
|
|
|
|
SparkFun Accessories LED RGB Addressable PTH 5mm Clear 5 Pack
- COM-12999
- SparkFun
-
1:
$6.84
-
25In Stock
-
40Expected 2026-09-02
|
Mouser Part #
474-COM-12999
|
SparkFun
|
SparkFun Accessories LED RGB Addressable PTH 5mm Clear 5 Pack
|
|
25In Stock
40Expected 2026-09-02
|
|
Min.: 1
Mult.: 1
|
No
|
|
|
|
SparkFun Accessories Photon Stackable Header- 12 Pin
- PRT-14322
- SparkFun
-
1:
$1.18
-
177In Stock
|
Mouser Part #
474-PRT-14322
|
SparkFun
|
SparkFun Accessories Photon Stackable Header- 12 Pin
|
|
177In Stock
|
|
Min.: 1
Mult.: 1
|
No
|
|
|
|
SparkFun Accessories One ruler to rule them all. This is a basic 12 inch ruler but made from a PCB. We have included a lots of useful information on each side of the ruler that you might use on a daily basis including Wire Gauge holes transistor diagrams common fracti
- TOL-15295
- SparkFun
-
1:
$14.33
-
22In Stock
|
Mouser Part #
474-TOL-15295
|
SparkFun
|
SparkFun Accessories One ruler to rule them all. This is a basic 12 inch ruler but made from a PCB. We have included a lots of useful information on each side of the ruler that you might use on a daily basis including Wire Gauge holes transistor diagrams common fracti
|
|
22In Stock
|
|
Min.: 1
Mult.: 1
|
No
|
|
|
|
Audio IC Development Tools Teensy 4 Audio Shield (Rev D)
- DEV-15845
- SparkFun
-
1:
$23.41
-
45In Stock
-
74On Order
|
Mouser Part #
474-DEV-15845
|
SparkFun
|
Audio IC Development Tools Teensy 4 Audio Shield (Rev D)
|
|
45In Stock
74On Order
|
|
Min.: 1
Mult.: 1
|
No
|
|
|
|
SparkFun Accessories This is the connector assembly used in the RTK Facet and RTK Facet L-Band and is intended for users who need to repair a device. Open Source Hardware has the benefit of allowing a user to understand and repair a broken device themselves! Note: This
- SPX-24706
- SparkFun
-
1:
$65.16
-
1In Stock
|
Mouser Part #
474-SPX-24706
|
SparkFun
|
SparkFun Accessories This is the connector assembly used in the RTK Facet and RTK Facet L-Band and is intended for users who need to repair a device. Open Source Hardware has the benefit of allowing a user to understand and repair a broken device themselves! Note: This
|
|
1In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is a simple five wire cable. Great for jumping from board to board or just about anything else. There is a 5-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments:
- PRT-10365
- SparkFun
-
1:
$2.28
-
29In Stock
|
Mouser Part #
474-PRT-10365
|
SparkFun
|
SparkFun Accessories This is a simple five wire cable. Great for jumping from board to board or just about anything else. There is a 5-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments:
|
|
29In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 6" lengthDocuments:
- PRT-10369
- SparkFun
-
1:
$2.87
-
135In Stock
|
Mouser Part #
474-PRT-10369
|
SparkFun
|
SparkFun Accessories This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 6" lengthDocuments:
|
|
135In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is a 35mm concave momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for mashing. This button has a great tactile 'clicky' feel.Features:Concave plunger designDurable nylon materialMicroswitch: m
- COM-09339
- SparkFun
-
1:
$5.14
-
68In Stock
|
Mouser Part #
474-COM-09339
|
SparkFun
|
SparkFun Accessories This is a 35mm concave momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for mashing. This button has a great tactile 'clicky' feel.Features:Concave plunger designDurable nylon materialMicroswitch: m
|
|
68In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories These are various leaded cables for attaching to multimeters power supplies oscilloscopes function generators etc.Dimensions: 36" Long
- CAB-00504
- SparkFun
-
1:
$12.76
-
7In Stock
|
Mouser Part #
474-CAB-00504
|
SparkFun
|
SparkFun Accessories These are various leaded cables for attaching to multimeters power supplies oscilloscopes function generators etc.Dimensions: 36" Long
|
|
7In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is a resistive analog joystick very similar to those found on the PSP1000. These compact joysticks are different in that they have a very interesting 'slide' feeling.For wiring this part if you look at the device from the bottom the pin out go
- COM-09426
- SparkFun
-
1:
$8.57
-
17In Stock
|
Mouser Part #
474-COM-09426
|
SparkFun
|
SparkFun Accessories This is a resistive analog joystick very similar to those found on the PSP1000. These compact joysticks are different in that they have a very interesting 'slide' feeling.For wiring this part if you look at the device from the bottom the pin out go
|
|
17In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 6" lengthDocuments:D
- PRT-10371
- SparkFun
-
1:
$2.92
-
100In Stock
|
Mouser Part #
474-PRT-10371
|
SparkFun
|
SparkFun Accessories This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 6" lengthDocuments:D
|
|
100In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories Polymer Lithium Ion Battery-110mAh
- PRT-13853
- SparkFun
-
Shipping Restricted
|
Mouser Part #
474-PRT-13853
|
SparkFun
|
SparkFun Accessories Polymer Lithium Ion Battery-110mAh
|
|
|
|
|
|
|