All Results for "sparkfun" (2,095)

Filters

Availability options
Select Image Part #
 Mfr.
Description Datasheet Availability Pricing (CAD) Filter the results in the table by unit price based on your quantity.
Qty. RoHS
SparkFun SparkFun Accessories This straight bar load cell (sometimes called a strain gauge) can translate up to 10kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to and proportional of the st
Datasheet
102In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories Face it if you keep this up your workbench is going to turn into a galaxy of small parts with no place for anything and nothing in its place. Okay so maybe that just happens to some of us but everyone could use a little organization and that's exa 12In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories Multiplexer Breakout -8 Channel 61In Stock
35Expected 2026-10-27
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories Standard 22 AWG solid Gray hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small spools of 25'. 6In Stock
10Expected 2026-09-15
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories Buttons are an easy and tactile way to interface with your project but why would you want to deal with debouncing polling and wiring up pull-up resistors? The Qwiic Button with built-in green LED simplifies all of those nasty worries away into an
Datasheet
3In Stock
35Expected 2026-08-28
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories LilyPad Slide Switch 10In Stock
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories Standard 22 AWG stranded red wire. Use this for soldering wire or any project in which you need flexible wire. Comes in small spools of 25'. 18In Stock
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories Here for all your mechatronic needs is a simple high quality continuous continuous rotation servo motor. This servo is able to take in 6 volts and deliver 66.7 oz-in. of maximum torque at 70 r/min.A standard 3-pin power and control cable is attach
Datasheet
23In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories These are nice cross-locking straight tweezers unlike traditional models the tips on these tweezers will remain closed until squeezed open. They have a very fine tip which allows you to pick up very small parts with precision. This is a great tool 9In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories This simple breakout board makes it easy to use our LED tactile switches in a breadboard or your next project.Note: Populate the board according to the polarity of the LED on the switch. The markings for the switch are irrelevant and can be reversed
Datasheet
13In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories Description: Ever wonder what goes on inside these things? Well this clear bread board might enlighten.Beyond the clear plastic this is really just a regular solderless breadboard. It has 2 power buses 30 columns and 10 rows - a total of 400 tie 11In Stock
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST connector on one end bare cable on the opposite end. It also comes with the mating connector for the JST.Dimensions: 6" lengthD
Datasheet
104In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories This 2xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable sliding cover which is secured with a small Phillips head screw. Another bonus is the ON/OFF switch which can be used to control 82In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories These 33mm (1.3") spring loaded pogo pins are great for programming and applications where you don't always want headers soldered onto your boards. We use them for our programming jigs in production. The pins fit snugly into most standard perf board
Datasheet
57In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories This is a simple five wire cable. Great for jumping from board to board or just about anything else. There is a 5-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 6" lengthDocuments:
Datasheet
67In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories These are 155mm long jumpers terminated as female to female. Use these to jumper from any male header on any board to any other male header. Multiple jumpers can be installed next to one another on a 0.1" header. Comes as 1 package of one hundred ju 6In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories This is a simple and easy to use battery box for powering the micro:bit Board. It accepts two AAA batteries and plugs directly into the board via a JST Connector. 8In Stock
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories The SparkFun MicroMod Data Logging Board offers a highly customizable low-power data logging platform using the MicroMod system allowing you to choose your own Processor to pair with the Carrier Board. The Data Logging Carrier Board breaks out conne 6In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories Check out these big 10mm through-hole LEDs! The opaque epoxy package causes these LEDs to have a soft diffuse glow.Features:Forward Voltage (R/G/B): 2.0 / 3.2 / 3.1VForward Current: 20mAIntensity (R/G/B): 550 / 250 / 700 mcdCommon CathodeDocuments:D
Datasheet
69In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories No this isn't a tank tread this is a 0.5m long Cable Carrier with 10x15mm bits composing its main body and two screw fasteners at each end for efficient mounting. Sometimes called a "drag chain " each carrier can be used in projects with a large nu 27In Stock
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories The SparkFun Qwiic Shield for Arduino Nano provides you with a quick and easy way to enter into SparkFun's Qwiic ecosystem with your Arduino Nano board. The Qwiic shield connects the I2C bus (GND 3.3V SDA and SCL) on your Arduino Nano to four Spark
Datasheet
11In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories These 33mm (1.3") spring loaded pogo pins are great for programming and applications where you don't always want headers soldered onto your boards. We use them for our programming jigs in production. The pins fit snugly into most standard perf board
Datasheet
235In Stock
300Expected 2026-09-08
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories This is a translucent silicon rubber button pad with 16 buttons originally inspired by the folks at monome.org. Each button has a hole underneath that accepts either a 3mm or 5mm standard LED. The idea is that you can create a button interface of you 9In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories 4-way Pacman type arcade joystick. Heavy duty design gives this joystick a great feel!Features:ABS plastic and solid alloy constructionUses 4 microswitches to detect on/off positionUnique handle designSpring return to centerVery rugged constructionRa
Datasheet
1In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories Heating Pad - 5x15cm
Datasheet
21In Stock
Min.: 1
Mult.: 1