All Results for "sparkfun" (2,095)

Filters

Availability options
Select Image Part #
 Mfr.
Description Datasheet Availability Pricing (CAD) Filter the results in the table by unit price based on your quantity.
Qty. RoHS
SparkFun Audio IC Development Tools Music Instrument Shield 9In Stock
Min.: 1
Mult.: 1

SparkFun Acceleration Sensor Development Tools The SparkFun ADXL313 Breakout is a low power high resolution (up to 13-bits) 3-axis accelerometer for measurement up to 4g. This breakout measures the static acceleration of gravity in tilt-sensing applications as well as dynamic acceleration res
Datasheet
8In Stock
Min.: 1
Mult.: 1
SparkFun Pressure Sensor Development Tools The SparkFun Qwiic BMP581 Pressure Sensor is a standard-sized 1in. by 1in. absolute pressure sensor breakout from Bosch Sensortec. The BMP581 boasts exceptional resolution (down to 1/64Pa) and accuracy while maintaining on-chip linearization and tem 30In Stock
65Expected 2026-09-22
Min.: 1
Mult.: 1

SparkFun Power Management IC Development Tools SparkFun Buck Regulator Breakout - 3.3V (AP63203) 112In Stock
153Expected 2026-10-30
Min.: 1
Mult.: 1
SparkFun Interface Development Tools SparkFun Pro Micro - RP2040 31In Stock
Min.: 1
Mult.: 1
SparkFun Multiple Function Sensor Development Tools The MyoWare 2.0 Arduino Shield is designed to easily connect up to six MyoWare 2.0 Muscle Sensors and Link Shields using 3.5mm TRS-to-TRS audio cables. The board comes pre-populated with male headers so all you would need to do is stack it on your 6In Stock
Min.: 1
Mult.: 1

SparkFun Distance Sensor Development Tool The SparkFun Qwiic dToF TMF8820 Imager is a direct time-of-flight (dToF) sensor that includes a single modular package with an associated Vertical Cavity Surface Emitting Laser (VCSEL) from AMS. The dToF device is based on Single Photon Avalanche Pho 1In Stock
Min.: 1
Mult.: 1

SparkFun Temperature Sensor Development Tools The SparkFun STTS22H Temperature Sensor is a Qwiic-enabled breakout board based on the ultralow-power high-accuracy digital temperature sensor from ST Microelectronics and housed in our standard Qwiic form factor. Thanks to its factory calibration 3In Stock
26Expected 2026-10-12
Min.: 1
Mult.: 1
SparkFun Current Sensor Development Tools The INA169 is a high-side current monitor which means that you place a resistor (a shunt resistor ) on the positive power rail and the INA169 measures the voltage drop across that resistor. The INA169 outputs a small current based on the
Datasheet
30In Stock
Min.: 1
Mult.: 1

SparkFun Power Management IC Development Tools EasyDriver - Stepper Motor Driver
Datasheet
1In Stock
25Expected 2026-08-27
Min.: 1
Mult.: 1

SparkFun Wall Mount AC Adapters This isn't just a standard wall adapter; it's a versatile power supply for your entire workbench. This 65W Power Delivery (PD) Wall Adapter packs serious performance into a compact brick capable of powering everything from your laptop and soldering
Datasheet
4In Stock
Min.: 1
Mult.: 1
SparkFun Speakers & Transducers If you want to get some sound out of your project but have a tight space budget this is a good way to do it. This 2.5W 4 Ohm speaker is only 28mm in diameter and just over 4mm thick. The cable is roughly 180mm long and terminates in a 2-wire JST co 43In Stock
Min.: 1
Mult.: 1
SparkFun Joysticks This is a "deluxe" joystick knob very similar to the thumb pads on PlayStation controllers. We specifically carry this knob to pair with our 16mm Deluxe Thumb Joystick. 35In Stock
Min.: 1
Mult.: 1
SparkFun Development Boards & Kits - ARM The SparkFun Artemis Development Kit is the latest board to be released around the SparkFun Artemis Module and it allows access to more software development features than previous Artemis based boards. This Kit includes the SparkFun Artemis DK board 8In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories There are a lot of different development boards requiring different input voltages. The SparkFun Power Supply Sample Kit provides you with a sampling of the power supplies that we offer to power your next project. Included in this kit are four differ 7In Stock
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories 7-Segment Display 6.5"" (Red)
Datasheet
17In Stock
29Expected 2026-08-18
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories There are lots of trimpots out there. Some are very large some so small they require a screwdriver. Here at SparkFun we just needed a simple one that worked. This 10K trimmable potentiometer has a small knob built right in and it's breadboard frien
Datasheet
290In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories Knobs are a great way to finish off your project and make it easier to adjust the level of your death ray. This knob mates to a 0.25" shaft. The knob slides onto the potentiometer and holds tightly with a strong friction fit.The main body of these kn
Datasheet
284In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories Jumper Wires Premium 6"" F/F Pack of 10 2In Stock
10Expected 2026-08-20
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories Snappable Protoboard Protoboard 19In Stock
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories These color-changing LEDs take the work out of creating crazy flashy blinky... ness. Simply apply power and the LED will cycle through the RGB colorspace: no external controller necessary! These bright and festive LEDs make great decorations LED "
Datasheet
40In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories Thumb Joystick Breakout
Datasheet
48In Stock
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories This is a SparkFun exclusive! These are 12" long jumper wires terminated as female to female. Use these to jumper from any male header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in five packs of twenty 5In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories SparkFun Qwiic Shield for Arduino 26In Stock
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories You don't have to worry about adding a resistor to an LED if you get an LED with a built in resistor! This pack of 25 red 5mm LEDs will help alleviate any frustrations you've had with accidentally burning them out by having a resistor in the diode it
Datasheet
3In Stock
Min.: 1
Mult.: 1