|
|
Development Boards & Kits - ARM The micro:bit Educator's Lab Pack includes 10 micro:bit boards and everything you need to get you started with the new learning platform. The Lab Pack has everything you need including micro:bits cables battery packs and a few parts to experiment
- LAB-17361
- SparkFun
-
1:
$567.12
-
5In Stock
|
Mouser Part #
474-LAB-17361
|
SparkFun
|
Development Boards & Kits - ARM The micro:bit Educator's Lab Pack includes 10 micro:bit boards and everything you need to get you started with the new learning platform. The Lab Pack has everything you need including micro:bits cables battery packs and a few parts to experiment
|
|
5In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Temperature Sensor Development Tools Melexis' MLX90614ESF-BAA is an infrared thermometer designed for non-contact temperature sensing. An internal 17-bit ADC and a powerful DSP contribute to the MLX90614's high accuracy and resolution. It has a huge number of applications including body
- SEN-09570
- SparkFun
-
1:
$28.80
-
98In Stock
|
Mouser Part #
474-SEN-09570
|
SparkFun
|
Temperature Sensor Development Tools Melexis' MLX90614ESF-BAA is an infrared thermometer designed for non-contact temperature sensing. An internal 17-bit ADC and a powerful DSP contribute to the MLX90614's high accuracy and resolution. It has a huge number of applications including body
|
|
98In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Raspberry Pi Accessories Raspberry Pi GPIO Ribbon Cable 40pin6
- CAB-13028
- SparkFun
-
1:
$5.76
-
137In Stock
|
Mouser Part #
474-CAB-13028
|
SparkFun
|
Raspberry Pi Accessories Raspberry Pi GPIO Ribbon Cable 40pin6
|
|
137In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Raspberry Pi Accessories This 2x20 shrouded header has the same number and spacing of pins as a Raspberry Pi so you can easily connect via ribbon cable to the low-level peripherals and get hacking! This through-hole header has 40 0.1"-spaced pins and is keyed for polarity.Ch
- PRT-13054
- SparkFun
-
1:
$1.51
-
31In Stock
|
Mouser Part #
474-PRT-13054
|
SparkFun
|
Raspberry Pi Accessories This 2x20 shrouded header has the same number and spacing of pins as a Raspberry Pi so you can easily connect via ribbon cable to the low-level peripherals and get hacking! This through-hole header has 40 0.1"-spaced pins and is keyed for polarity.Ch
|
|
31In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Headers & Wire Housings This is a 2x18 pin female header. Each pin has a spacing of 0.1" in-between each other.This header mates perfectly with the Alchitry Br Prototype Element Board.
- PRT-16581
- SparkFun
-
1:
$3.24
-
96In Stock
|
Mouser Part #
474-PRT-16581
|
SparkFun
|
Headers & Wire Housings This is a 2x18 pin female header. Each pin has a spacing of 0.1" in-between each other.This header mates perfectly with the Alchitry Br Prototype Element Board.
|
|
96In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
NFC/RFID Tags & Transponders This is a basic RFID tag that functions within the MIFARE Classic 1K guidelines. You can use these for all sorts of identification and sensing applications. The tag also has 1K of data storage which can be read and written from a compatible device.
- SEN-10127
- SparkFun
-
1:
$5.54
-
17In Stock
|
Mouser Part #
474-SEN-10127
|
SparkFun
|
NFC/RFID Tags & Transponders This is a basic RFID tag that functions within the MIFARE Classic 1K guidelines. You can use these for all sorts of identification and sensing applications. The tag also has 1K of data storage which can be read and written from a compatible device.
|
|
17In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Force Sensors & Load Cells This is a piezoresistive force sensor from Tekscan. The harder you press the lower the sensor's resistance. Pressing hard the resistance changes from infinite to 50k. The sensor itself is thin and flexible but the resistance does not change while
- SEN-11207
- SparkFun
-
1:
$43.56
-
5In Stock
|
Mouser Part #
474-SEN-11207
|
SparkFun
|
Force Sensors & Load Cells This is a piezoresistive force sensor from Tekscan. The harder you press the lower the sensor's resistance. Pressing hard the resistance changes from infinite to 50k. The sensor itself is thin and flexible but the resistance does not change while
|
|
5In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Screwdrivers, Nut Drivers & Socket Drivers What should every hacker have available to them? That's right a screwdriver (you have to get into those cases somehow). What makes screwdrivers even better is when there are a variety of interchangeable bits to use in different situations as you nee
- TOL-12891
- SparkFun
-
1:
$7.92
-
11In Stock
|
Mouser Part #
474-TOL-12891
|
SparkFun
|
Screwdrivers, Nut Drivers & Socket Drivers What should every hacker have available to them? That's right a screwdriver (you have to get into those cases somehow). What makes screwdrivers even better is when there are a variety of interchangeable bits to use in different situations as you nee
|
|
11In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Keyboards Multimedia Wireless Keyboard
- WIG-14271
- SparkFun
-
1:
$45.00
-
6In Stock
|
Mouser Part #
474-WIG-14271
|
SparkFun
|
Keyboards Multimedia Wireless Keyboard
|
|
6In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Interface Development Tools The SparkFun ESLOV to Qwiic Bridge lets you quickly and easily connect Qwiic breakouts to Arduino boards with an ESLOV connector for I2C communication. ESLOV and Qwiic allow for simple assembly of I2C circuits without requiring soldering. The ESLOV t
- BOB-23589
- SparkFun
-
1:
$3.17
-
20In Stock
|
Mouser Part #
474-BOB-23589
|
SparkFun
|
Interface Development Tools The SparkFun ESLOV to Qwiic Bridge lets you quickly and easily connect Qwiic breakouts to Arduino boards with an ESLOV connector for I2C communication. ESLOV and Qwiic allow for simple assembly of I2C circuits without requiring soldering. The ESLOV t
|
|
20In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Test Clips IC Test Clip SOIC 8-Pin
- COM-13153
- SparkFun
-
1:
$67.49
-
8In Stock
|
Mouser Part #
474-COM-13153
|
SparkFun
|
Test Clips IC Test Clip SOIC 8-Pin
|
|
8In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Photodiodes The BPW34 is a tiny general purpose PiN photodiode. This photodiode has a ton of uses one of which is to use it is a mini solar cell to power your project. The cell is sensitive to a wide range of light wavelengths (430-1100nm) so it should produc
- PRT-09541
- SparkFun
-
1:
$2.52
-
35In Stock
|
Mouser Part #
474-PRT-09541
|
SparkFun
|
Photodiodes The BPW34 is a tiny general purpose PiN photodiode. This photodiode has a ton of uses one of which is to use it is a mini solar cell to power your project. The cell is sensitive to a wide range of light wavelengths (430-1100nm) so it should produc
|
|
35In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
USB Connectors The Raspberry Pi Micro USB to USB-C Adapter is a small adapter that allows a male Micro-B USB power adapter the ability to power devices with a female USB Type C port specifically the Raspberry Pi 4. This adapter is perfect for those looking to powe
- PRT-18015
- SparkFun
-
1:
$3.07
-
7In Stock
|
Mouser Part #
474-PRT-18015
|
SparkFun
|
USB Connectors The Raspberry Pi Micro USB to USB-C Adapter is a small adapter that allows a male Micro-B USB power adapter the ability to power devices with a female USB Type C port specifically the Raspberry Pi 4. This adapter is perfect for those looking to powe
|
|
7In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Audio IC Development Tools The 22.86 x 22.86mm Nicla Voice allows for easy implementation of always-on speech recognition on the edge because it integrates Syntiant s powerful NDP120 Neural Decision processor to run multiple AI algorithms leveraging bio-inspired advanced
- SEN-21219
- SparkFun
-
1:
$147.60
-
1In Stock
|
Mouser Part #
474-SEN-21219
|
SparkFun
|
Audio IC Development Tools The 22.86 x 22.86mm Nicla Voice allows for easy implementation of always-on speech recognition on the edge because it integrates Syntiant s powerful NDP120 Neural Decision processor to run multiple AI algorithms leveraging bio-inspired advanced
|
|
1In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Interface Development Tools USB to RS-485 Converter
- BOB-09822
- SparkFun
-
1:
$35.87
-
76In Stock
|
Mouser Part #
474-BOB-09822
|
SparkFun
|
Interface Development Tools USB to RS-485 Converter
|
|
76In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Zigbee Modules - 802.15.4 After years of popularity with the XBee Series 1 and XBee Series 2 Pro Modules we now have the XBee Series 3 Pro which brings the best of both worlds. XBee 3 not only handles 802.15.4 and ZigBee but also BLE protocols and you can now talk to the m
- WRL-15127
- SparkFun
-
1:
$55.71
-
83In Stock
|
Mouser Part #
474-WRL-15127
|
SparkFun
|
Zigbee Modules - 802.15.4 After years of popularity with the XBee Series 1 and XBee Series 2 Pro Modules we now have the XBee Series 3 Pro which brings the best of both worlds. XBee 3 not only handles 802.15.4 and ZigBee but also BLE protocols and you can now talk to the m
|
|
83In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Programmable Logic IC Development Tools SparkFun QuickLogic Thing Plus - EOS S3
- DEV-17273
- SparkFun
-
1:
$71.28
-
23In Stock
|
Mouser Part #
474-DEV-17273
|
SparkFun
|
Programmable Logic IC Development Tools SparkFun QuickLogic Thing Plus - EOS S3
|
|
23In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Headers & Wire Housings This is a super small 2x5 pin female PTH header. This header is in the common configuration for JTAG applications. Each pin has a spacing of 1.27mm in between each other.
- PRT-15363
- SparkFun
-
1:
$2.71
-
29In Stock
-
70Expected 2026-06-02
|
Mouser Part #
474-PRT-15363
|
SparkFun
|
Headers & Wire Housings This is a super small 2x5 pin female PTH header. This header is in the common configuration for JTAG applications. Each pin has a spacing of 1.27mm in between each other.
|
|
29In Stock
70Expected 2026-06-02
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Vibration Motors A vibration motor! This itty-bitty shaftless vibratory motor is perfect for non-audible indicators. Use in any number of applications to indicate to the wearer when a status has changed. All moving parts are protected within the housing. With a 2-3.
- ROB-08449
- SparkFun
-
1:
$4.25
-
70In Stock
|
Mouser Part #
474-ROB-08449
|
SparkFun
|
Vibration Motors A vibration motor! This itty-bitty shaftless vibratory motor is perfect for non-audible indicators. Use in any number of applications to indicate to the wearer when a status has changed. All moving parts are protected within the housing. With a 2-3.
|
|
70In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Board Mount Motion & Position Sensors This basic piezo sensor from Measurement Specialties is often used for flex touch vibration and shock measurements. A small AC and large voltage (up to +/-90V) is created when the film moves back and forth. A simple resistor should get the voltage
- SEN-09196
- SparkFun
-
1:
$16.37
-
14In Stock
|
Mouser Part #
474-SEN-09196
|
SparkFun
|
Board Mount Motion & Position Sensors This basic piezo sensor from Measurement Specialties is often used for flex touch vibration and shock measurements. A small AC and large voltage (up to +/-90V) is created when the film moves back and forth. A simple resistor should get the voltage
|
|
14In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Board Mount Motion & Position Sensors The Minisense 100 from Measurement Specialties is a low-cost cantilever-type vibration sensor loaded by a mass to offer high sensitivity at low frequencies. Useful for detecting vibration and 'tap' inputs from a user. A small AC and large voltage (up
- SEN-09199
- SparkFun
-
1:
$22.58
-
3In Stock
|
Mouser Part #
474-SEN-09199
|
SparkFun
|
Board Mount Motion & Position Sensors The Minisense 100 from Measurement Specialties is a low-cost cantilever-type vibration sensor loaded by a mass to offer high sensitivity at low frequencies. Useful for detecting vibration and 'tap' inputs from a user. A small AC and large voltage (up
|
|
3In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
NFC/RFID Development Tools RFID (radio-frequency identification) is the wireless non-contact use of radio-frequency electromagnetic fields for the purposes of identifying and tracking tags attached to objects. This is the ID-3LA a very simple to use RFID reader module from I
- SEN-11862
- SparkFun
-
1:
$40.25
-
5In Stock
-
67On Order
|
Mouser Part #
474-SEN-11862
|
SparkFun
|
NFC/RFID Development Tools RFID (radio-frequency identification) is the wireless non-contact use of radio-frequency electromagnetic fields for the purposes of identifying and tracking tags attached to objects. This is the ID-3LA a very simple to use RFID reader module from I
|
|
5In Stock
67On Order
On Order:
37 Expected 2026-07-02
30 Expected 2026-08-10
Factory Lead-Time:
12 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Zigbee Modules - 802.15.4 After years of popularity with the XBee Series 1 and XBee Series 2 Pro Modules we now have the XBee Series 3 Pro which brings the best of both worlds. XBee 3 not only handles 802.15.4 and ZigBee but also BLE protocols and you can now talk to the m
- WRL-15131
- SparkFun
-
1:
$52.11
-
7In Stock
|
Mouser Part #
474-WRL-15131
|
SparkFun
|
Zigbee Modules - 802.15.4 After years of popularity with the XBee Series 1 and XBee Series 2 Pro Modules we now have the XBee Series 3 Pro which brings the best of both worlds. XBee 3 not only handles 802.15.4 and ZigBee but also BLE protocols and you can now talk to the m
|
|
7In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Antenna Accessories This aluminum adapter converts the very common 1/4" thread found on camera tri-pods and mono-pods to the 5/8" 11-TPI (threads per inch) found on high-end surveying antennas and equipment. It's ideal for mounting RTK surveying antennas onto a monopod
- PRT-17546
- SparkFun
-
1:
$9.36
-
14In Stock
-
45Expected 2026-07-24
|
Mouser Part #
474-PRT-17546
|
SparkFun
|
Antenna Accessories This aluminum adapter converts the very common 1/4" thread found on camera tri-pods and mono-pods to the 5/8" 11-TPI (threads per inch) found on high-end surveying antennas and equipment. It's ideal for mounting RTK surveying antennas onto a monopod
|
|
14In Stock
45Expected 2026-07-24
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Educational Robotic Kits This is the Wheel Encoder Kit from DAGU a simple add-on to any wheeled robot that can help measure the speed or distance the chassis travels. Each wheel encoder kit consists of two neodymium 8-pole magnets with rubber hubs and two hall-effect sensor
- ROB-12629
- SparkFun
-
1:
$20.09
-
29In Stock
|
Mouser Part #
474-ROB-12629
|
SparkFun
|
Educational Robotic Kits This is the Wheel Encoder Kit from DAGU a simple add-on to any wheeled robot that can help measure the speed or distance the chassis travels. Each wheel encoder kit consists of two neodymium 8-pole magnets with rubber hubs and two hall-effect sensor
|
|
29In Stock
|
|
Min.: 1
Mult.: 1
|
|
|